Released 2016
Rated Input: AC85 - 264V 1Φ
Rated Output Wattage: 150W
Rated Output Voltage: 12V,15V,24V,36V,48V
Warranty Period 5-year (Refer to Instruction Manuals)

*Make sure necessary tests will be carried out on your end equipment with the power supply installed in accordance with any required EMC/EMI regulations.

Features of PJA150F

• Compact design (Depth: 129mm 5.08inches)
• High efficiency (90%typ PJA150F-24, AC230Vin, 100% load)
• Low power consumption (1.5W typ AC240Vin, no load at standard model)
• UL508 approved (Except option -J) , and complies with SEMI F47 (see instruction manual 1.1)
• Various connection interface options (vertical terminal [-T], AMP connector [-J])

Ordering Information and Options

PJ(1)  A(2)  150(3)  F(4)  -  (5)  -  (6)  

(1) Series name
(2) Single output
(3) Output wattage
(4) Universal input
(5) Output voltage
(6) Optional
   C: with Coating
   R: with Remote ON/OFF (Required external power source)
   J: Connector interface
   T: Vertical terminal block
   N2: with DIN rail

See 5.1 in Instruction Manual.

Recommended EMI Filters

Product Line-up

Product Name Output Wattage Output Voltage・Current
PJA150F-12 150W ACIN 115V - 264V 12V 12.5A
PJA150F-15 150W ACIN 115V - 264V 15V 10A
PJA150F-24 153.6W ACIN 115V - 264V 24V 6.4A
PJA150F-36 151.2W ACIN 115V - 264V 36V 4.2A
PJA150F-48 153.6W ACIN 115V - 264V 48V 3.2A
  • * For further information and how to use, please see in Cosel product catalog.

Block Diagram

Optional Parts

Attachment Plate, Harness

Category Part Number Description PDF DXF
F-PLA100-1 Attachment plate to facilitate mounting.
(For mounting at the bottom)
F-PLA100-2 Attachment plate to facilitate mounting.
(For mounting at the front side/back side)
DIN rail Attachment Plate
FD-PJA150-2 DIN rail attachment plate.
(DIN rail width : 35mm)
H-IN-22 Mating harness for input of the connector type power supply with J option. -
H-IN-26 Mating harness for input of the connector type power supply with J1 option. -
H-OU-37 Mating harness for output with J option. -
H-OU-44 Mating harness for output with J1 option. -
H-RC-1 Harness for using option : -R. -
Table1 Product Status Information
No. Product Status Definition
1 New Product New Product. Recommended for new design.
2 Recommended Recommended for new design.
3 blank Product in mass production
4 NRND Not recommended for new design.
5 To be discontinued PDN (Product Discontinuation Notice) is issued and LTB (Last Time Buy) is under consideration.
6 Discontinued LTB order is no longer available.