This power supply is manufactured by SMD technology. The stress to P.C.B like twisting or bending causes the defect of the unit, so handle the unit with care.
Features of LDA150W-9• Rugged PCB type (CEM3)
• Input range
LDA10 - 75F (AC85 - 264V)
LDA100 - 300W (AC85 - 132V/AC170 - 264V)
• Built-in inrush current limiting, overcurrent and overvoltage protection circuits
Ordering Information and Options
LDA(1) 150(2) W(3) - 5(4) - □(5)(1) Series name
(2) Output wattage
(3) Autoranging input
(4) Output voltage
(5) Optional *
C: with Coating
G: Low leakage current
L: with LED
R: with Remote ON/OFF
S: with Chassis
SN: with Chassis & cover
Y: with Potentiometer
*Please contact us about safety approvals for the model with option.
Recommended EMI Filters
Low Leakage Current type: NAM series
*Use of an EMI/EMC filter is recommended when a power supply is connected with several devices so that additional filtering is necessary.
*Make sure that your final application will meet the required EMC standard by measuring the EMI level of the power supply used together with an EMI/EMC filter.
|Input Voltage||AC85 - 132V/170 - 264V 1Φ|
|Adjustable Voltage Range||Fixed ("Y" which can be adjusted the output is available as option :9, 12, 15, 18, 24, 30, 48V ±10%)|
|Protection Circuit And Others||Overcurrent Protection||Works over 105% of rating (-H: peak) and recovers automatically|
|Overvoltage Protection||Works at 115 - 140% of rating|
|Remote ON/OFF||Option (Refer to Instruction Manual)|
|Remote Sensing||Not provided|
|Operating Temperature/Humidity||-10 to +60℃, 20 - 90%RH (Non condensing) *|
|Safety And Noise Regulations||Agency Approvals (At only AC input)||UL60950-1, CSA C22.2 No.234, EN62368-1 Complies with DEN-AN and IEC60950-1|
|Conducted Noise||Complies with FCC-B, CISPR22-B, EN55022-B, VCCI-B|
|Weight||510g max (without chassis and cover)|
- * For further information and how to use, please see in Cosel product catalog.
- * For another documents aren't listed, please feel free to contact to a Cosel representative.
|H-IN-5||Mating harness for input of the connector type power supply. (Mfr : J.S.T.)||-|
|H-IN-10||Mating harness for input of the connector type power supply. (Mfr : J.S.T.)||-|
|H-OU-11||Mating harness for output of the connector type power supply. (Mfr : J.S.T.)||-|
|H-OU-12||Mating harness for output of the connector type power supply. (Mfr : J.S.T.)||-|
|H-RC-1||Harness for using option : -R.||-|