This power supply is manufactured by SMD technology. The stress to P.C.B like twisting or bending causes the defect of the unit, so handle the unit with care.
*Please contact our local sales representatives for recommended replacement models.
Features of LDA10F-5• Rugged PCB type (CEM3)
• Input range
LDA10 - 75F (AC85 - 264V)
LDA100 - 300W (AC85 - 132V/AC170 - 264V)
• Built-in inrush current limiting, overcurrent and overvoltage protection circuits
Ordering Information and Options
LDA(1) 10(2) F(3) - 5(4) - □(5)(1) Series name
(2) Output wattage
(3) Universal input
(4) Output voltage
(5) Optional *
C: with Coating
G: Low leakage current
S: with Chassis
SN: with Chassis & cover
Y: with Potentiometer
*Please contact us about safety approvals for the model with option.
Recommended EMI Filters
Low Leakage Current type: NAM series
*Use of an EMI/EMC filter is recommended when a power supply is connected with several devices so that additional filtering is necessary.
*Make sure that your final application will meet the required EMC standard by measuring the EMI level of the power supply used together with an EMI/EMC filter.
|Input Voltage||AC85 - 264V 1Φ or DC110 - 370V|
|Adjustable Voltage Range||Fixed ("Y" which can be adjusted the output is available as option :5, 12, 15, 24V ±10%)|
|Protection Circuit And Others||Overcurrent Protection||Works over 105% of rating and recovers automatically|
|Overvoltage Protection||Works over 115% of rating, by zener diode clamping|
|Remote ON/OFF||Not provided|
|Remote Sensing||Not provided|
|Operating Temperature/Humidity||-10 to +60℃, 20 - 90%RH (Non condensing) *|
|Safety And Noise Regulations||Agency Approvals (At only AC input)||UL60950-1, CSA C22.2 No.60950-1, EN62368-1 Complies with DEN-AN and IEC60950-1|
|Conducted Noise||Complies with FCC-B, CISPR22-B, EN55022-B, VCCI-B|
|Weight||75g max (without chassis and cover)|
- * For further information and how to use, please see in Cosel product catalog.
- * For another documents aren't listed, please feel free to contact to a Cosel representative.
|H-IN-5||Mating harness for input of the connector type power supply. (Mfr : J.S.T.)||-|
|H-IN-10||Mating harness for input of the connector type power supply. (Mfr : J.S.T.)||-|
|H-OU-8||Mating harness for output of the connector type power supply. (Mfr : J.S.T.)||-|
|H-RC-1||Harness for using option : -R.||-|