PBA/PJA/PLA series are "Unit Type" power supply. The line-up is shown in Table 1.
PJA/PLA series is lower price model of PBA series and specification is different partially. Table 2 through 5 shows the specification comparison and the suitable product shall be selected for the requirement.
| Rated output power [W] | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 10 | 15 | 30 | 50 | 75 | 100 | 150 | 300 | 600 | 1000 | 1500 | ||
| PBA | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
| PLA,PJA | PLA | - | ● | ● | ● | - | - | - | - | - | - | - |
| PJA | - | - | - | - | - | ● | ● | ● | ● | ● | ● | |
| No. | Subject | Specifications | PBA10F/15F/30F /50F/75F |
PLA15F/30F/50F | Notes | |
|---|---|---|---|---|---|---|
| 1 | Electrical characteristics | Input voltage | AC85-264V | AC85-264V (Required derating at less than AC115V input) |
||
| 2 | Efficiency [%] | 10W | 77typ | - | Reference value of DC24V output mode AC200Vin,Io=100%(PBA) AC230Vin,Io=100%(PLA) |
|
| 3 | 15W | 78typ | 80typ | |||
| 4 | 30W | 81typ | 83.5typ | |||
| 5 | 50W | 84typ | 84typ | |||
| 6 | 75W | 85typ | - | |||
| 7 | Operating temperature | -10℃-71℃ | -20℃-70℃ | PLA series require ambient temperature derating at -10ºC - -20ºC. | ||
| 8 | Structure | Size | 10W | 31×78×68mm | - | Exclude terminal block and screw |
| 9 | 15W | 31×78×85mm | 38×80×73mm | |||
| 10 | 30W | 31×78×103mm | 38×80×88mm | |||
| 11 | 50W | 31×82×120mm | 38×80×99mm | |||
| 12 | 75W | 32×82×135mm | - | |||
| 13 | Case & Cover | Standard model has Chassis only (-N option : with cover) | With Chassis and Cover for standard model | |||
| 14 | Cooling method | Convection | Convection | |||
Hatched areas have advantage against the competitive model.
For more details, please see specification and instruction manual on our website.
| No. | Subject | Specifications | PBA100F/150F | PJA100F/150F | Notes | |
|---|---|---|---|---|---|---|
| 1 | Electrical characteristics | Input voltage | AC85-264V | AC85-264V (Required derating at less than AC115V input) |
||
| 2 | Efficiency [%] | 100W | 86typ | 88typ | Reference value of DC24V output model AC200Vin,Io=100%(PBA) AC230Vin,Io=100%(PJA) |
|
| 3 | 150W | 88typ | 90typ | |||
| 4 | Operating temperature | -10℃-71℃ | -20℃-70℃ | PJA series require ambient temperature derating at -10ºC - -20ºC. | ||
| 5 | Structure | Size | 100W | 32×93×147mm | 41×97×109mm | Exclude terminal block and screw |
| 6 | 150W | 34×93×168mm | 41×97×129mm | |||
| 7 | Case & Cover | Standard model has Chassis only (-N option : with cover) | With Chassis and Cover for standard model | |||
| 8 | Cooling method | Convection | Convection | |||
| 9 | Functions | Reduce power consumption | × | ○ (Power consumption at no load :1.5W typ) |
Ripple/ripple noise specification for PJA series change at Io=0-30% in order to reduce power consumption. | |
Hatched areas have advantage against the competitive model.
For more details, please see specification and instruction manual on our website.
| No. | Subject | Specifications | PBA300F/600F | PJA300F/600F | Notes | |
|---|---|---|---|---|---|---|
| 1 | Electrical characteristics | Input voltage | AC85-264V | AC85-264V (Required derating at less than AC115V input) |
||
| 2 | Efficiency [%] | 300W | 82typ | 86typ | Reference value of DC24V output model AC200Vin,Io=100%(PBA) AC230Vin,Io=100%(PJA) |
|
| 3 | 600W | 84typ | 88typ | |||
| 4 | Peak output current | ○ Available for DC24V output, with condition at AC200V input |
× | |||
| 5 | Operating temperature | -20℃-71℃ | -20℃-70℃ | |||
| 6 | Structure | Size | 300W | 102×42×170mm | 102×41×190mm | Exclude terminal block and screw |
| 7 | 600W | 120×61×190mm | 120×61×215mm | |||
| 8 | Cooling method | Forced air (Intake air) | Forced air (Exhaust air) | |||
| 9 | Functions | Adjustable near 0V | ○ | × | Refer to catalog and instruction manual | |
| 10 | Output voltage adjustment by external signal | ○ | × | |||
| 11 | AUX | ○ | × | |||
| 12 | Remote control | ○ | × Possible by option -R (External voltage source is required) |
|||
| 13 | Remote sensing | 300W | ○ | × | ||
| 14 | 600W | ○ | × Possible by option -W |
|||
| 15 | Alarm | 300W | ○ | × | ||
| 16 | 600W | ○ | × Possible by option -W |
|||
| 17 | Parallel operation | 300W | ○ | × | ||
| 18 | 600W | ○ | × Possible by option -W |
|||
Hatched areas have advantage against the competitive model.
For more details, please see specification and instruction manual on our website.
| No. | Subject | Specifications | PBA1000F/1500F | PJA1000F/1500F | Notes | |
|---|---|---|---|---|---|---|
| 1 | Electrical characteristics | Input voltage | AC85-264V (Required deraing at less than AC90V input for PBA1500F) |
AC85-264V (Required derating at less than AC115V input) |
||
| 2 | Efficiency [%] | 1000W | 86typ | 88typ | Reference value of DC24V output model AC200Vin,Io=100%(PBA) AC230Vin,Io=100%(PJA) |
|
| 3 | 1500W | 87typ | 88typ | |||
| 4 | Peak output current | ○ PBA1000F：Available for DC24V output, with condition at AC200V input PBA1500F：Available for DC24V/36V output, with condition at AC200V input |
× | |||
| 5 | Operating temperature | -20℃-71℃ | -20℃-70℃ | |||
| 6 | Structure | Size | 1000W | 150×61×240mm | 150×61×240mm | Exclude terminal block and screw |
| 7 | 1500W | 178×61×268mm | 178×61×268mm | |||
| 8 | Cooling method | Forced air (Intake air) |
Forced air (Exhaust air) |
|||
| 9 | Functions | Adjustable near 0V | ○ | × | Refer to catalog and instruction manual | |
| 10 | Output voltage adjustment by external signal | ○ | × | |||
| 11 | AUX | ○ | × | |||
| 12 | Remote control | ○ | × Possible by option -R (External voltage source is required) |
|||
| 13 | Remote sensing | ○ | × Possible by option -W |
|||
| 14 | Alarm | ○ | × Possible by option -W |
|||
| 15 | Parallel operation | ○ | × Possible by option -W |
|||
Hatched areas have advantage against the competitive model.
For more details, please see specification and instruction manual on our website.
Technical Product-related Inquires
e-mail:support@cosel.co.jp