Power Supplies (Optional Parts)

Model Part Number Description PDF DXF
CR-PC-1 Applicable to -AI3 option of AME series.
This is a unit to convert Extended UART signal to RS232 signal mutually.
-
CR-PC-2 Applicable to -I3 option of AME series.
This is a unit to convert Extended UART signal to RS485(Modbus-RTU) signal mutually.
-
CR-PC-1 Applicable to -AI3 option of AME series.
This is a unit to convert Extended UART signal to RS232 signal mutually.
-
CR-PC-2 Applicable to -I3 option of AME series.
This is a unit to convert Extended UART signal to RS485(Modbus-RTU) signal mutually.
-
CR-PC-1 Applicable to -AI3 option of AME series.
This is a unit to convert Extended UART signal to RS232 signal mutually.
-
CR-PC-2 Applicable to -I3 option of AME series.
This is a unit to convert Extended UART signal to RS485(Modbus-RTU) signal mutually.
-
CR-PC-1 Applicable to -AI3 option of AME series.
This is a unit to convert Extended UART signal to RS232 signal mutually.
-
CR-PC-2 Applicable to -I3 option of AME series.
This is a unit to convert Extended UART signal to RS485(Modbus-RTU) signal mutually.
-
Close
Model Part Number Description PDF DXF
CR-PC-1 This is a unit to convert Extended UART signal to RS232 signal mutually. -
CR-PC-2 This is a unit to convert Extended UART signal to RS485(Modbus-RTU) signal mutually. -
CR-PC-1 This is a unit to convert Extended UART signal to RS232 signal mutually. -
CR-PC-2 This is a unit to convert Extended UART signal to RS485(Modbus-RTU) signal mutually. -
CR-PC-1 This is a unit to convert Extended UART signal to RS232 signal mutually. -
CR-PC-2 This is a unit to convert Extended UART signal to RS485(Modbus-RTU) signal mutually. -
CR-PC-1 This is a unit to convert Extended UART signal to RS232 signal mutually. -
CR-PC-2 This is a unit to convert Extended UART signal to RS485(Modbus-RTU) signal mutually. -
Close
Model Part Number Description PDF DXF
CR-PC-1 Applicable to -I3 option of RB series.
This is a unit to convert Extended UART signal to RS232 signal mutually.
-
CR-PC-1 Applicable to -I3 option of RB series.
This is a unit to convert Extended UART signal to RS232 signal mutually.
-
Close
Table1 Product Status Information
No. Product Status Definition
1 New Product New Product. Recommended for new design.
2 Recommended Recommended for new design.
3 blank Product in mass production
4 NRND Not recommended for new design.
5 To be discontinued PDN (Product Discontinuation Notice) is issued and LTB (Last Time Buy) is under consideration.
6 Discontinued LTB order is no longer available.